Extreme Networks ExtremeWare XOS - Show Mac-Binding

VLAN Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
776
show mac-binding
show mac-binding {bvlan <bvlan-name> {<bridge-mac> {svlan <svlan-name>
<customer-mac>}} | svlan <svlan-name>}
Description
Displays information about the internal database binding the remote bridge (BVLAN) MAC addresses
and customer host MAC addresses behind that BVLAN.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display information on the database binding the backbone and customer MAC
addresses.
This command displays the following information:
● BVLAN name
● B-TAG value
● MAC address of the 802.1ah-configured bridge facing the customer’s device
● SVLAN
● S-TAG value
● MAC address of device that sent the frame
● Age of the entry in seconds
● Port number on which the packet was learned
Example
The following command displays the MAC binding table on the switch:
show mac-binding
bvlan-name Enter the name of the BVLAN you want to display.
bridge-mac Enter the MAC address of the BVLAN you want to display.
svlan-name Enter the name of the SVLAN you want to display.
customer-mac Enter the name of the customer-mac you want to display.