configure ospf area delete range
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1549
configure ospf area delete range
configure ospf area <area-identifier> delete range [<ip-address> <ip-mask>
| <ipNetmask>]
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
area-identifier Specifies an OSPF area.
ip-address Specifies an IP address.
ip-mask Specifies a subnet mask.
ipNetmask Specifies IP address / Netmask.
To Next Page
Loading...