configure lldp ports system-name
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
461
configure lldp ports system-name
configure lldp ports [all | <port_list>] [advertise | no-advertise] system-
name
Description
Configures the LLDP port to advertise or not to advertise its system name to its neighbors.
Syntax Description
Default
No advertise.
Usage Guidelines
N/A.
Example
The following command configures port 1:6 to advertise the system name to neighbors:
configure lldp ports 1:4 - 1:8 advertise system-name
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.
advertise Specifies to send the information to neighbors.
no-advertise Specifies not to send the information to neighbors.
To Next Page
Loading...