Extreme Networks ExtremeWare XOS - Configure Cfm Domain Association Delete End-Point

configure cfm domain association delete end-point
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
425
configure cfm domain association delete end-point
configure cfm domain <domain_name> association <association_name> ports
<port_list> delete end-point [inward-facing | outward-facing ]
Description
Deletes a maintenance end point (MEP) from that MA; use this command to delete either the inward-
facing or the outward-facing MEP.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete an MEP.
Use the
show cfm command to verify your configuration.
Example
The following command deletes port 5:10 as the inward-facing MEP on the test association in the brazil
domain:
configure cfm domain brazil association test ports 5:10 delete end-point inward-facing
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
domain_name Enter the domain associated with the MA you are configuring.
association_name Enter the name of the MA for which you are deleting an MEP.
ports Enter the port number you want to delete as either in inward-facing or an
outward-facing MEP.
inward-facing Enter the port of the inward-facing MEP you are deleting.
outward-facing Enter the port of the outward-facing MEP you are deleting.