Commands for Connectivity Fault Management
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
424
Example
The following command configures port 1:20 as a MIP on the 350 association in the spain domain:
configure cfm domain spain association 350 ports 1:20 add intermediate-point
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
To Next Page
Loading...