configure ospf spf-hold-time
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1569
configure ospf spf-hold-time
configure ospf spf-hold-time <seconds>
Description
Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.
Syntax Description
Default
3 seconds.
Usage Guidelines
None.
Example
The following command configures the minimum number of seconds between Shortest Path First (SPF)
recalculations:
configure ospf spf-hold-time 6
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
seconds Specifies a time in seconds. The range is 0 to 300 seconds.
To Next Page
Loading...