Network Login Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1050
clear netlogin state
clear netlogin state [{port <portlist>} {vlan <vlan name>}]
Description
Clears and initializes the Network Login sessions on a VLAN port.
Syntax Description
Default
None.
Usage Guidelines
Clear the states of every MAC learned on this VLAN port and put the port back to unauthenticated
state. The port will be moved to its original VLAN if configured in Campus mode.
Example
The following example clears the Network Login state of port 2:9 in VLAN corp:
clear netlogin state port 2:9 vlan corp
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
portlist Specifies the ports to clear.
vlan name Specifies a VLAN to clear.
To Next Page
Loading...