configure ospf delete virtual-link
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1559
configure ospf delete virtual-link
configure ospf delete virtual-link <router-identifier> <area-identifier>
Description
Removes a virtual link.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes a virtual link:
configure ospf delete virtual-link 10.1.2.1 10.1.0.0
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
router-identifier Specifies the router ID of the other end of the link.
area-identifier Specifies an OSPF area.
To Next Page
Loading...