enable rip splithorizon
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1491
enable rip splithorizon
enable rip splithorizon
Description
Enables the split horizon algorithm for RIP.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the
router from which the route was learned. Split horizon omits routes learned from a neighbor in updates
sent to that neighbor.
Example
The following command enables the split horizon algorithm for RIP:
enable rip splithorizon
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...