RIP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1500
unconfigure rip
unconfigure rip {vlan <vlan-name> | all}
Description
Resets all RIP parameters to the default for all VLANs or for the specified VLAN.
Syntax Description
Default
All.
Usage Guidelines
Does not change the enable/disable state of the RIP settings.
Example
The following command resets the RIP configuration to the default for the VLAN finance:
unconfigure rip finance
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan-name Specifies a VLAN name.
To Next Page
Loading...