Extreme Networks ExtremeWare XOS - Show Qosprofile

show qosprofile
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
931
show qosprofile
show qosprofile [ingress | egress | ports [ all | <port_list>]
Description
Displays QoS information on the switch.
Syntax Description
Default
Displays egress QoS information for all ports.
Usage Guidelines
The displayed QoS profile information differs depending on the platform you are running on.
BlackDiamond 8800 a-series and e-series modules and Summit X450 a and X450e series switches only. The
following information displays for these switches:
● Available Qos profiles
● Weight
● Percentage of maximum buffer
When you specify ports, the following information also displays per QoS queue:
● Committed rate
● Peak rate
Ingress Specifies ingress queues.
NOTE: This parameter is available only on the BlackDiamond 10808 switch.
egress Specifies egress queues; this is the default value.
NOTE: This parameter is available only on the BlackDiamond 10808 and
12804 switch.
ports Specifies to display information for specified ports.
NOTE: This parameter is available only on the BlackDiamond 10808 and
12804 switches, the BlackDiamond a-series and e-series modules, and the
Summit X450a and X450e series switches.
port_list Specifies a list of slots and ports.
NOTE: This parameter is available only on the BlackDiamond 10808 and
12804 switches, the BlackDiamond a-series and e-series modules, and the
Summit X450a and X450e series switches.
all Specifies all ports.
NOTE: This parameter is available only on the BlackDiamond 10808 and
12804 switches, the BlackDiamond a-series and e-series modules, and the
Summit X450a and X450e series switches.