Extreme Networks ExtremeWare XOS - Configure Esrp Add Track-Iproute

configure esrp add track-iproute
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1245
configure esrp add track-iproute
configure esrp <esrpDomain> add track-iproute <ipaddress>/<masklength>
Description
Configures an ESRP domain to track a route entry in the system’s routing table.
Syntax Description
Default
Disabled.
Usage Guidelines
The track-ip metric consists of the total number of tracked IP routes that are “up” or functional.
An ESRP domain can track eight IP routes.
Example
The following command enables IP route failure tracking for routes to the specified subnet:
configure esrp esrp1 add track-iproute 192.168.46.0/24
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
esrpDomain Specifies an ESRP domain name.
ipaddress Specifies the IP address of the route entry to be tracked.
masklength Specifies the subnet of the route entry to be tracked.