Commands for Managing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
166
configure sntp-client update-interval
configure sntp-client update-interval <update-interval>
Description
Configures the interval between polls for time information from SNTP servers.
Syntax Description
Default
64 seconds.
Usage Guidelines
None.
Example
The following command configures the interval timer:
configure sntp-client update-interval 30
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
update-interval Specifies an interval in seconds.
To Next Page
Loading...