Extreme Networks ExtremeWare XOS - Preface

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
33
Preface
This preface provides an overview of this guide, describes guide conventions, and lists other
publications that may be useful.
Introduction
This guide provides the complete syntax for all the commands available in the currently supported
versions of the ExtremeWare
®
XOS™ software running on modular switches from Extreme Networks
®
.
This guide is intended for use as a reference by network administrators who are responsible for
installing and setting up network equipment. It assumes knowledge of Extreme Networks switch
configuration. For conceptual information and guidance on configuring Extreme Networks switches, see
the ExtremeWare XOS Concepts Guide for your version of the ExtremeWare XOS software.
Terminology
When features, functionality, or operation is specific to a switch family, the family name is used.
Explanations about features and operations that are the same across all product families simply refer to
the product as the “switch.”
Conventions
This sections discusses the conventions used in this guide.
Platform-dependent Conventions
Each command has a separate entry for platform availability, which addresses which platforms support
the entire feature.
In many cases, although the command is available on all platforms, each platform uses specific
keywords. These keywords specific to each platform are shown in the Syntax Description and discussed
in the Usage Guidelines.