Extreme Networks ExtremeWare XOS - Show Igmp

IP Multicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1844
show igmp
show igmp {vlan} {<vlan name>}
Description
This command can be used to display an IGMP-related configuration and group information, per
VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the IGMP configuration:
show igmp
The following is sample output from this command:
IGMP:
Query Interval: 125 sec
Max Response Time: 10 sec
Last Member Query: 1 sec
Robustness: 2
IGMP Snooping:
Router Timeout: 260 sec
Host Timeout: 260 sec
Igmp Snooping Fast Leave Time: 1000 ms
Igmp Snooping Flag: forward-all-router
Igmp Snooping Flood-list: none
Igmp Snooping Proxy: Enable
VLAN IP Address Flags nLRMA nLeMA IGMPver
default 0.0.0.0 / 0 ----z 0 0 2
gho 0.0.0.0 / 0 ----z 0 0 2
hguo_fo 0.0.0.0 / 0 ----z 0 0 2
sqa_east 1.1.1.1 /24 -fmiz 3 0 2
vcs1 12.1.1.115 /24 Ufmiz 6 0 2
vlan name Specifies a VLAN name.