Extreme Networks ExtremeWare XOS - Show Iparp Proxy

IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1402
show iparp proxy
show iparp proxy {[<ipNetmask> | <ip_addr> <mask>]} {vr <vr_name>}
Description
Displays the proxy ARP table.
Syntax Description
Default
N/A.
Usage Guidelines
If no argument is specified, then all proxy ARP entries are displayed.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays the proxy ARP table:
show iparp proxy 10.1.1.5/24
History
This command was first available in ExtremeWare XOS 10.1.
The
vr option was added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
ipNetmask Specifies an IP address/mask length.
ip_address Specifies an IP address.
mask Specifies a subnet mask.
vr_name Specifies a virtual router.