STP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1214
enable stpd
enable stpd {<stpd_name>}
Description
Enables the STP protocol for one or all STPDs.
Syntax Description
Default
Disabled.
Usage Guidelines
If you want to enable the STP protocol for all STPDs, do not specify an STPD name.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
stpd_name Specifies an STPD name on the switch.
To Next Page
Loading...