Extreme Networks ExtremeWare XOS - Disable Rip Export

disable rip export
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1479
disable rip export
disable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 |
ospf-extern2 | ospf-inter | ospf-intra | static]
Description
Disables RIP from redistributing routes from other routing protocols.
Syntax Description
Default
Disabled.
Usage Guidelines
This command disables the exporting of BGP, static, direct, and OSPF-learned routes into the RIP
domain.
Example
The following command disables RIP from redistributing any routes learned from OSPF:
disable rip export ospf
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
static Specifies static routes.
bgp Specifies BGP routes.
direct Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
e-bgp Specifies external BGP routes.
i-bgp Specifies internal BGP routes.
ospf Specifies all OSPF routes.
ospf-intra Specifies OSPF-intra area routes.
ospf-inter Specifies OSPF-inter area routes.
ospf-extern1 Specifies OSPF external route type 1.
ospf-extern2 Specifies OSPF external route type 2.