VRRP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1314
disable vrrp vrid
disable vrrp {vlan <vlan_name> vrid <vridval>}
Description
Disables a specific VRRP virtual router or all VRRP virtual routers.
Syntax Description
Default
N/A.
Usage Guidelines
This disables a specific virtual router on the switch. If no VRRP VLAN is specified, all virtual routers on
the switch are disabled.
Example
The following command disables all VRRP virtual routers on the switch:
disable vrrp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan_name Specifies the name of a VRRP VLAN.
vridval Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
To Next Page
Loading...