BGP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1772
enable bgp peer-group use-ip-router-alert
enable bgp peer-group <peer-group-name> use-ip-router-alert
Description
Enables the router alert IP option in outgoing BGP messages to the specified peer group.
Syntax Description
Default
Disabled.
Usage Guidelines
None.
Example
The following command enables the feature for the peer group outer:
enable bgp peer-group outer use-ip-router-alert
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
peer-group-name Specifies a peer group.
To Next Page
Loading...