Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
960
configure radius shared-secret
configure radius {mgmt-access | netlogin} [primary | secondary] shared-
secret {encrypted} <string>
Description
Configures the authentication string used to communicate with the RADIUS authentication server.
Syntax Description
Default
Unconfigured.
Usage Guidelines
The secret must be the same between the client switch and the RADIUS server.
The RADIUS server must first be configured for use with the switch as a RADIUS client.
The
mgmt-access keyword specifies the RADIUS server used for switch management authentication.
The
netlogin keyword specifies the RADIUS server used for network login authentication.
If you do not specify the
mgmt-access or netlogin keywords, the secret applies to both the primary or
secondary switch management and netlogin RADIUS servers.
The
encrypted keyword is primarily for the output of the show configuration command, so the
shared secret is not revealed in the command output. Do not use it to set the shared secret.
Example
The following command configures the shared secret as “purplegreen” on the primary RADIUS server
for both switch management and network login:
configure radius primary shared-secret purplegreen
The following command configures the shared secret as “redblue” on the primary switch management
RADIUS server:
configure radius mgmt-access primary shared-secret redblue
mgmt-access Specifies the switch management RADIUS authentication server.
netlogin Specifies the network login RADIUS authentication server.
primary Configures the authentication string for the primary RADIUS server.
secondary Configures the authentication string for the secondary RADIUS server.
encrypted Indicates that the string is already encrypted.
string The string to be used for authentication.
To Next Page
Loading...