OSPF Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1574
configure ospf vlan neighbor delete
configure ospf vlan <vlan-name> neighbor delete <ip-address>
Description
Deletes the IP address of a point-to-point neighbor.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor delete 10.0.0.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan-name Specifies a VLAN name.
ip-address Specifies an IP address.
To Next Page
Loading...