configure snmp sysLocation
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
127
configure snmp sysLocation
configure snmp syslocation <sysLocation>
Description
Configures the location of the switch.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to indicate the location of the switch. A maximum of 255 characters is allowed.
To view the location of the switch on the switch, use the
show switch command. The show switch
command displays switch statistics including the location of the switch.
Example
The following command configures a switch location name on the system:
configure snmp syslocation englab
The following output from the show switch command displays englab as the location of the switch:
SysName: engineeringlab
SysLocation: englab
SysContact: FredJ
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
sysLocation An alphanumeric string that specifies the switch location.
To Next Page
Loading...