show ospf neighbor
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1601
show ospf neighbor
show ospf neighbor {routerid [<ip-address> {<ip-mask>} | <ipNetmask>]}
{vlan <vlan-name>} {detail}
Description
Displays information about an OSPF neighbor.
Syntax Description
Default
If no argument is specified, all OSPF neighbors are displayed.
Usage Guidelines
None.
Example
The following command displays information about the OSPF neighbors on the VLAN accounting:
show ospf neighbor vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ip-address Specifies an IP address
ip-mask Specifies a subnet mask.
ipNetmask Specifies IP address / Netmask
vlan-name Specifies a VLAN name.
detail Specifies detail information.
To Next Page
Loading...