unconfigure pim
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1861
unconfigure pim
unconfigure pim {vlan <vlan_name>}
Description
Resets all PIM settings on one or all VLANs to their default values.
Syntax Description
Default
If no VLAN is specified, the configuration is reset for all PIM interfaces.
Usage Guidelines
If you unconfigure PIM, you will also unconfigure PIM-SSM, removing the PIM-SSM range.
Example
The following command resets all PIM settings on the VLAN accounting:
unconfigure pim vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan_name Specifies the VLAN from which PIM is to be unconfigured.
To Next Page
Loading...