Extreme Networks ExtremeWare XOS - Clear Counters Edp

clear counters edp
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
299
clear counters edp
clear counters edp {ports <ports>}
Description
Clears the counters associated with Extreme Discovery Protocol (EDP).
Syntax Description
Default
If you do not specify a port, the EDP counters will be cleared for all ports.
Usage Guidelines
This command clears the following counters for EDP protocol data units (PDUs) sent and received per
EDP port:
● Switch PDUs transmitted
● VLAN PDUs transmitted
● Transmit PDUs with errors
● Switch PDUs received
● VLAN PDUs received
● Received PDUs with errors
Example
The following command clears the EDP counters on all ports:
clear counters edp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ports Specifies one or more ports or slots and ports.