Extreme Networks ExtremeWare XOS - Create Cfm Domain Vpn-ID Oui Index Ma-Level

create cfm domain vpn-id oui index ma-level
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
441
create cfm domain vpn-id oui index ma-level
create cfm domain vpn-id oui <oui> index <index> ma-level <level>
Description
Creates a maintenance domain (MD) in the RFC 2685 VPN ID format and assigns an MA level to that
domain. The RFC 2685 VPN ID format consists of a 24-bit VPN OUI + a 32-bit VPN index value.
Syntax Description
Default
N/A.
Usage Guidelines
You can have up to 8 domains on a switch, and each one must have a unique MA level.
You assign each domain a maintenance association (MA) level, which function in a hierarchy for
forwarding CFM messages. The levels are from 0 to 7; with the lowest number being superior in the
hierarchy.
The IEEE standard 801.2ag specifies different levels for different network users, as follows:
● 0 to 2 for end users
● 3 and 4 for Internet service providers (ISPs)
● 5 to 7 for operators (entities carrying the information for the ISPs)
Example
The following command creates a domain, using the RFC 2658 VPN ID format, with a VPN OUI of
11:22:33 and a VPN index value of 50; it also assigns that domain an MA level of 1:
create cfm domain vpn-id oui 11:22:33 index 50 ma-level 1
History
This command was first available in ExtremeWare XOS 11.4.
oui Enter a virtual private network (VPN) Organizational Unique Identifier (OUI) in
the format XX:XX:XX to specify part of the domain name.
index Enter the 32-bit VPN index you want to append to the OUI to specify the
domain name.
level Specifies the MA level you are assigning to this domain. Enter a value between
0 and 7.