IP Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1336
configure iparp max_pending_entries
configure iparp max_pending_entries <max_pending_entries>
Description
Configures the maximum allowed incomplete IP ARP entries.
Syntax Description
Default
256.
Usage Guidelines
Range: 1 - 4096.
Example
The following command sets the maximum pending IP ARP entries to 500 entries:
configure iparp max_pending_entries 500
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
max_pending_entries Specifies a number of maximum IP ARP entries.
To Next Page
Loading...