Extreme Networks ExtremeWare XOS - Configure Iproute Sharing Max-Gateways

configure iproute sharing max-gateways
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1349
configure iproute sharing max-gateways
configure iproute sharing max-gateways <max_gateways>
Description
Configures the maximum number of equal-cost multipath (ECMP) gateways per destination supported
in hardware.
Syntax Description
Default
● BlackDiamond 8800 family of switches and Summit X450 switch only—4
● BlackDiamond 10808 and BlackDiamond 12804 switches only—8 (not configurable)
Usage Guidelines
You must save the configuration and reboot the switch for the new value to take effect. To see the
current and configured value, use the following command:
show ipconfig
Example
The following command changes the maximum number of ECMP gateways per destination supported
in hardware to eight:
configure iproute sharing max-gateways 8
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the Summit X450 switch and the BlackDiamond 8800 family of
switches.
max-gateways Specifies the maximum number of ECMP gateways per destination supported
in the switch hardware. The only values allowed are 4 and 8.