disable learning port
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
343
disable learning port
disable learning port [<port_list> | all]
Description
Disables MAC address learning on one or more ports for security purposes.
Syntax Description
Default
Enabled.
Usage Guidelines
Use this command in a secure environment where access is granted via permanent forwarding
databases (FDBs) per port.
Example
The following command disables MAC address learning on port 4:3 on a modular switch:
disable learning ports 4:3
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
port_list Specifies one or more ports or slots and ports.
all Specifies all ports and slots.
To Next Page
Loading...