CLEAR-Flow Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1104
show clear-flow
show clear-flow
Description
Displays the status of the CLEAR-Flow agent, any CLEAR-Flow policies on each interface, and the
number of CLEAR-Flow rules.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following display shows output for the command show clear-flow:
clear-flow: Enabled
VLAN Port Policy Name No. of CF Rules
==============================================================
* 2:1 CFexample 6
* 2:26 CFexample 6
* 2:40 CFexample 6
Default * CFexample 6
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.
To Next Page
Loading...