Extreme Networks ExtremeWare XOS - Show Ospfv3 Lsdb

show ospfv3 lsdb
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1653
show ospfv3 lsdb
show ospfv3 {domain <domainName>} lsdb {detail} {area [<area-identifier> |
all] {lstype [router | network | inter-prefix | inter-router | intra-
prefix]} | [vlan [<vlan-name> | all] | tunnel [<tunnel-name> | all]]
{lstype link} | lstype [as-external | router | network | inter-prefix |
inter-router | intra-prefix | link]} {lsid <lsid-address>} {adv-router
<router-identifier>}
Description
Displays a table of the current Link-State Database (LSDB).
Syntax Description
Default
Display in summary format.
Usage Guidelines
ExtremeWare XOS provides several filtering criteria for the show ospfv3 lsdb command. You can
specify multiple search criteria and only the results matching all of the criteria are displayed. This
allows you to control the displayed entries in large routing tables.
A common use of this command is to omit all optional parameters, resulting in the following shortened
form:
show ospfv3 lsdb
domainName Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
detail Specifies to display all fields of matching LSAs in a multi-line format.
area-identifier Specifies an OSPFv3 area, a four-byte, dotted decimal number.
all Specifies all OSPFv3 areas, IPv6 configured VLANs, or IPv6 tunnels.
link Link LSA
router Router LSA
network Network LSA
inter-prefix Inter Area Prefix LSA
inter-router Inter Area Router LSA
intra-prefix Intra Area Prefix LSA
as-external AS External LSA
lsid-address Specifies the link state ID of the LSA.
routerid-identifier Specifies the router identifier of the advertising router.
vlan-name Specifies an IPv6 configured VLAN.
tunnel-name Specifies an IPv6 tunnel.