show access-list dynamic
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
849
show access-list dynamic
show access-list dynamic
Description
Displays the names of existing dynamic ACLs and a count of how many times each is used.
Syntax Description
There are no arguments or variables for this command.
Default
N/A.
Usage Guidelines
This command displays the names of existing dynamic ACLs, and how many times the ACL is used
(bound to an interface).
To see the conditions and actions for a dynamic ACL, use the following command:
show access-list dynamic rule <rule> {detail}
Example
The following command displays names of all the dynamic ACLs:
show access-list dynamic
The following is sample output for this command:
Dynamic Rules:
Udpacl Bound to 1 interfaces
icmp-echo Bound to 1 interfaces
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...