ACL Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
848
ipArp 0 0
tcpflags-syn 0 0
qos_hongkong * 3:8 ingress
qp2cnt 0 0
qp4cnt 0 0
qp5cnt 0 0
tcp v1 * ingress
PERMIT_SYN_ACK 3759119344 2217044928
The following example displays all the counters for the ACL on port 2:1:
show access-list counter port 2:1
The output of this command is similar to the following:
Policy Name Vlan Name Port Direction
Counter Name Packet Count Byte Count
=====================================================================
tc_2.4 * 2:1 ingress
arp192 3 204
denyAll 0 0
destIp 0 0
destIp2 0 0
History
History
This command was available in ExtremeWare XOS 10.1.
The egress options was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms. The egress option is available on BlackDiamond 10808 and
BlackDiamond 12804 switches only.
To Next Page
Loading...