delete access-list
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
839
delete access-list
delete access-list <dynamic-rule>
Description
Deletes a dynamic ACL
Syntax Description
Default
N/A.
Usage Guidelines
This command deletes a dynamic ACL rule. Before you delete a dynamic ACL, it must be removed
from any interfaces it is applied to. Use the
configure access-list delete command to remove the
ACL from an interface.
Example
The following command deletes the dynamic ACL icmp-echo:
delete access-list icmp-echo
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
dynamic-rule Specifies the dynamic ACL name.
To Next Page
Loading...