Security Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
992
disable radius
disable radius {mgmt-access | netlogin}
Description
Disables the RADIUS client.
Syntax Description
Default
RADIUS authentication is disabled for both switch management and network login by default.
Usage Guidelines
Use the mgmt-access keyword to disable RADIUS authentication for switch management functions.
Use the
netlogin keyword to disable RADIUS authentication for network login.
If you do not specify a keyword, RADIUS authentication is disabled on the switch for both management
and network login.
Example
The following command disables RADIUS authentication on the switch for both management and
network login:
disable radius
The following command disables RADIUS authentication on the switch for network login:
disable radius netlogin
History
This command was first available in ExtremeWare XOS 10.1.
The
mgmt-access and netlogin keywords were added in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
mgmt-access Specifies the switch management RADIUS authentication server.
netlogin Specifies the network login RADIUS authentication server.
To Next Page
Loading...