Extreme Networks ExtremeWare XOS - Reboot

Commands for Accessing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
96
reboot
reboot {time <month> <day> <year> <hour> <min> <sec>} {cancel} {msm
<slot_id>}
Description
Reboots the switch or the module in the specified slot at a specified date and time.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify a reboot time, the switch will reboot immediately following the command, and
any previously scheduled reboots are cancelled. Prior to rebooting, the switch returns the following
message:
Do you want to save configuration changes to primary and reboot?
(y - save and reboot, n - reboot without save, <cr> - cancel command)
To cancel a previously scheduled reboot, use the cancel option.
Modular switches only. The modules that can be rebooted are switch fabric MSM modules.
BlackDiamond 8800 series switch only. On the BlackDiamond 8800 series switch, if your default
BootROM image becomes corrupted, you can force the MSM to boot from an alternate BootROM image
by inserting a sharp object into the “A” and “R” holes on the MSM and applying slight pressure. Refer
to Extreme Networks Consolidated XOS Hardware Installation Guide for information on the MSM.
The
reboot MSM option on the BlackDiamond 8800 series switch affects the entire module.
Example
The following command reboots the switch at 8:00 AM on April 15, 2005:
reboot time 04 15 2005 08 00 00
time Specifies a reboot date in mm dd yyyy format and reboot time in hh mm ss
format.
cancel Cancels a previously scheduled reboot.
msm Specifies rebooting the MSM module.
NOTE: This variable is available only on modular switches.
slot_id Specifies the slot--A or B--for an MSM module.
NOTE: This variable is available only on modular switches.