enable bootp vlan
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1375
enable bootp vlan
enable bootp vlan [<vlan> | all]
Description
Enables the generation and processing of BOOTP packets on a VLAN to obtain an IP address for the
VLAN from a BOOTP server.
Syntax Description
Default
Disabled.
Usage Guidelines
None.
Example
The following command enables the generation and processing of BOOTP packets on a VLAN named
accounting:
enable bootp vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan Specifies a VLAN name.
all Specifies all VLANs.
To Next Page
Loading...