RIP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1466
configure rip delete vlan
configure rip delete vlan [<vlan-name> | all]
Description
Disables RIP on an IP interface.
Syntax Description
Default
N/A.
Usage Guidelines
When an IP interface is created, RIP configuration is disabled on the interface by default. When the RIP
interface is disabled by this command, the parameters are not reset to default automatically.
Example
The following command deletes RIP on a VLAN named finance:
configure rip delete finance
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan-name Specifies a VLAN name.
all Specifies all VLANs.
To Next Page
Loading...