ACL Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
858
show access-list usage acl-slice
show access-list usage acl-slice port <port>
Description
Displays the number of ACL slices and rules consumed by the ACLs on the slices that support a
particular port.
Syntax Description
Default
N/A.
Usage Guidelines
The BlackDiamond 8800 a-series and e-series modules and Summit X450a and X450e series switches
support 128 rules per slice for the slices that support each group of 24 ports. Since the BlackDiamond
8800 a-series modules and Summit X450a series switches support sixteen slices per 24-port group, there
can be a maximum of 2048 rules supported for the group. Since the BlackDiamond 8800 e-series
modules and Summit X450e series switches support 8 slices per 24-port group, there can be a maximum
of 1024 rules supported for the group.
Use this command to display how many slices, and how many rules per each slice are currently
consumed by the ACLs on the slices that support a particular port. This command also displays which
ports share the same slices as the specified port.
Example
The following example displays the ACL slice usage on port 8:1:
show access-list usage acl-slice port 8:1
The output of this command is similar to the following:
Ports 8:1-8:12, 8:25-8:36
Slices: Used: 3 Available: 5
Slice 5 Rules: Used: 9 Available: 119
Slice 6 Rules: Used: 1 Available: 127
Slice 7 Rules: Used: 24 Available: 104
History
This command was first available in ExtremeWare XOS 11.5.
port Specifies to display the usage for the slices that support this port.
To Next Page
Loading...