Extreme Networks ExtremeWare XOS - Show Clear-Flow Rule-All

CLEAR-Flow Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1108
show clear-flow rule-all
show clear-flow rule-all
Description
Displays all the CLEAR-Flow rules on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following display shows output for the command show clear-flow rule-all:
Policy Name Vlan Name Port Rule Name Last Value OP Threshold TCNT Sec
================================================================================
clearFlow * 2:1 rule-count 1 > 100 0 11
clearFlow * 2:1 rule-delta 1 > 1000 0 11
clearFlow * 2:1 rule-delta 0 > 1000 0 4
clearFlow * 2:1 rule-delta 0 > 20 0 11
clearFlow * 2:1 rule-ratio 0 > 10 0 11
clearFlow * 2:1 rule-ratio 0 > 10 0 4
clearFlow * 2:26 rule-count 9030635 > 100 1 10
clearFlow * 2:26 rule-delta 9030635 > 1000 1 10
clearFlow * 2:26 rule-delta 0 > 1000 0 4
clearFlow * 2:26 rule-delta 0 > 20 0 10
clearFlow * 2:26 rule-ratio 0 > 10 0 10
clearFlow * 2:26 rule-ratio 0 > 10 0 4
clearFlow Default * rule-count 36666439 > 100 1 10
clearFlow Default * rule-delta 36666439 > 1000 1 10
clearFlow Default * rule-delta 0 > 1000 0 4
clearFlow Default * rule-delta 0 > 20 0 10
clearFlow Default * rule-ratio 0 > 10 0 10
clearFlow Default * rule-ratio 0 > 10 0 4
================================================================================
Total Entries: 18
Notation:
TCNT - Number of times expression is continously evaluated to be true
Sec - Number of seconds elapsed from last sampled data