configure timezone
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
77
configure timezone
configure timezone {name <tz_name>} <GMT_offset>
{autodst {name <dst_timezone_ID>} {<dst_offset>}
{begins [every <floatingday> | on <absoluteday>] {at <time_of_day>}
{ends [every <floatingday> | on <absoluteday>] {at <time_of_day>}}}
| noautodst}
Description
Configures the Greenwich Mean Time (GMT) offset and Daylight Saving Time (DST) preference.
Syntax Description
Default
Autodst, beginning every first Sunday in April, and ending every last Sunday in October.
tz_name Specifies an optional name for this timezone specification. May be up to six
characters in length. The default is an empty string.
GMT_offset Specifies a Greenwich Mean Time (GMT) offset, in + or - minutes.
autodst Enables automatic Daylight Saving Time.
dst-timezone-ID Specifies an optional name for this DST specification. May be up to six
characters in length. The default is an empty string.
dst_offset Specifies an offset from standard time, in minutes. Value is in the range of 1
to 60. Default is 60 minutes.
floatingday Specifies the day, week, and month of the year to begin or end DST each year.
Format is:
<week> <day> <month> where:
• <week> is specified as [first | second | third | fourth | last] or 1-5.
• <day> is specified as [sunday | monday | tuesday | wednesday | thursday |
friday | saturday] or 1-7 (where 1 is Sunday).
• <month> is specified as [january | february | march | april | may | june | july
| august | september | october | november | december] or 1-12.
Default for beginning is first sunday april; default for ending is last sunday
october.
absoluteday Specifies a specific day of a specific year on which to begin or end DST.
Format is:
<month> <day> <year> where:
• <month> is specified as 1-12.
• <day> is specified as 1-31.
• <year> is specified as 2003-2035.
The year must be the same for the begin and end dates.
time_of_day Specifies the time of day to begin or end Daylight Saving Time. May be
specified as an hour (0-23) or as hour:minutes. Default is 2:00.
noautodst Disables automatic Daylight Saving Time.
To Next Page
Loading...