Extreme Networks ExtremeWare XOS - Show Clear-Flow Rule

CLEAR-Flow Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1106
show clear-flow rule
show clear-flow [port <port> | vlan <vlanname> | any] {rule <rulename>}
{detail}
Description
Displays the CLEAR-Flow rules, values, and configuration.
Syntax Description
Default
N/A.
Usage Guidelines
If you issue the command without the rule keyword, all of the CLEAR-Flow rules for the policy on the
port, VLAN, and the wildcard are displayed. If you specify a rule name, only that rule will be
displayed. The
detail keyword displays detailed information about the rule.
Example
The following display shows output for the command show clear-flow port 2:6:
Rule Name Type Period Last Rel Threshold TCNT NumAction
Value Oper If Else
===============================================================================
rule-count CN 30 16892762 > 100 7 3 3
rule-delta DT 30 7762385 > 1000 1 4 3
rule-delta-2 DT 5 0 > 1000 0 4 3
rule-delta-ratio DR 30 0 > 20 0 2 0
rule-ratio RT 30 0 > 10 0 3 3
rule-ratio-2 RT 5 0 > 10 0 3 3
===============================================================================
Total Entries: 6
Notation:
Threshold Type: CN - Count, DT - Delta, RT - Ratio, DR - DeltaRatio
TCNT - Number of times expression is continously evaluated to be true
port Specifies the port.
vlanname Specifies the VLAN.
any Specifies the wildcard interface.
rulename Specifies the entry name of a CLEAR-Flow rule.
detail Display detailed information.