unconfigure ospf
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1603
unconfigure ospf
unconfigure ospf {vlan <vlan-name> | area <area-identifier>}
Description
Resets one or all OSPF interfaces to the default settings.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command resets the OSPF interface to the default settings on the VLAN accounting:
unconfigure ospf accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
vlan-name Specifies a VLAN name.
area-identifier Specifies an OSPF area.
To Next Page
Loading...