OSPF Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1578
delete ospf area
delete ospf area [<area-identifier> | all]
Description
Deletes an OSPF area or all OSPF areas.
Syntax Description
Default
N/A.
Usage Guidelines
An OSPF area cannot be deleted if it has an associated interface. Also, area 0.0.0.0 cannot be deleted.
Example
The following command deletes an OSPF area:
delete ospf area 1.2.3.4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
area-identifier Specifies an OSPF area.
all Specifies all areas.
To Next Page
Loading...