Extreme Networks ExtremeWare XOS - Show Esrp Counters

show esrp counters
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1293
show esrp counters
show esrp {<name>} counters
Description
Displays ESRP counter information for ESRP or for a specified ESRP domain.
Syntax Description
Default
Displays summary ESRP counter information.
Usage Guidelines
The show esrp counters command displays information about the number of:
● Failed received protocol packets
● Failed sent protocol packets
● Dropped protocol packets belonging to unknown ESRP domains
● Dropped protocol packets due to invalid Extreme Encapsulation Protocol (EEP) data
● Dropped packets due to old sequence numbers
● Dropped packets due to an invalid 802.1Q tag
● Dropped packets because the packet length was truncated (packet length is less than expected)
● Dropped packets due to failed checksum verification
The
show esrp {<name>} counters command displays information about the number of times ESRP,
ESRP-aware, and ESRP error packets were transmitted and received.
Example
The following command displays ESRP counter information:
show esrp counters
The following is sample output from this command:
Current-time: Sun Nov 16 00:25:08 2003
esrpStatsRxHelloFailed = 0
esrpStatsTxHelloFailed = 0
esrpStatsUnknownDomain = 0
esrpStatsUnsupportedEEPVersion = 0
esrpStatsInvalidEEPLength = 0
esrpStatsNotInTimeWindow = 0
esrpStatsInvalid8021Qtag = 0
name Specifies an ESRP domain name.