Extreme Networks ExtremeWare XOS - Show Igmp Snooping

show igmp snooping
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1847
show igmp snooping
show igmp snooping {vlan <name> {port <port>}| detail | cache} {IGMPv3}
Description
Displays IGMP snooping registration information and a summary of all IGMP timers and states.
Syntax Description
Default
IGMPv2.
Usage Guidelines
The two types of IGMP snooping entry are sender entry and subscribed entry.
The following information is displayed in a per-interface format:
● Group membership information
● Router entry
● Timeout information
● Sender entry
Example
The following command displays IGMP snooping registration information for the switch:
show igmp snooping vlan accounting
Output from this command looks similar to the following:
Vlan Vid Port #Senders #Receivers Router Enable
--------------------------------------------------------------
default 1 0 Yes
vhs3 4090 0 Yes
vhs4 4089 0 Yes
vcs5 15 0 Yes
vcs6 16 0 Yes
vcs3 4086 0 Yes
vcs4 1014 0 Yes
5:7 5 No
5:9 5 No
name Specifies a VLAN name.
detail Displays the information in detailed format.
cache Displays the cache setting for IGMP snooping senders.
IGMPv3 Display the IGMP group in IGMPv3 format (if group record is IGMPv3
compatible, otherwise display in earlier format).