configure snmpv3 delete access
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
149
Example
The following command deletes all entries with the group name userGroup:
configure snmpv3 delete access userGroup
The following command deletes the group userGroup with the security model snmpv1 and security level
of authentication and no privacy (
authnopriv):
configure snmpv3 delete access userGroup sec-model snmpv1 sec-level authnopriv
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_group_name parameter was added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...