Commands for Accessing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
108
Config Selected: primary.cfg
Config Booted: primary.cfg
primary.cfg Created by ExtremeWare XOS version 11.2.0.16
93463 bytes saved on Sat April 14 04:24:31 2006
The show switch detail command displays the same information shown above.
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...