Extreme Networks ExtremeWare XOS - Page 1226

STP Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1226
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
Partner STP version: Dot1d
Edge Port Safe Guard: Disabled
Participating Vlans: Default
The following command displays the detailed information for the ports in STPD s1 configured for
MSTP:
show stpd s1 ports detail
The following is sample output from this command:
Stpd: s1 Port: 1 PortId: 8001 Stp: ENABLED Path Cost: 4
Port Mode: 802.1D
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16
Designated Root: 80:00:00:04:96:1f:a8:44 Designated Cost: 0, IntCost: 0
Designated Bridge: 80:00:00:04:96:1f:a8:44 Designated Port Id: 8001
Partner STP version: MSTP
Edge Port Safe Guard: Disabled
maxAge: 20 msgAge: 0 fwdDelay: 15 helloTime: 2 maxHops: 20
Participating Vlans: v1
Stpd: s1 Port: 2 PortId: 8002 Stp: ENABLED Path Cost: 4
Port Mode: 802.1D
Port State: BLOCKING Topology Change Ack: FALSE
Port Priority: 16
Designated Root: 80:00:00:04:96:1f:a8:44 Designated Cost: 0, IntCost: 0
Designated Bridge: 80:00:00:04:96:1f:a8:44 Designated Port Id: 8002
Partner STP version: Dot1d
Edge Port Safe Guard: Disabled
maxAge: 20 msgAge: 0 fwdDelay: 15 helloTime: 2 maxHops: 20
Participating Vlans: v1
History
This command was available in ExtremeWare XOS 10.1.
Information about MSTP was added in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.